Drum Filling Machine Moveable on Wheels
Mod. RF200M
Single-head drum filling machine, on wheels.
For filling in commercial 200 liter drums (or containers of different capacity) high-viscosity materials such as silicone, acrylic, polyurethane, etc.
The filling machine mod. RF200M fills volumetrically by level in commercial 200 liter drums (on request, also containers of different capacity) high/very high viscosity products avoiding trapping air bubbles in the product during filling.
The machine prevents the formation of air bubbles because it fills the drum from the bottom, going progressively upwards while filling the container.
The product comes out under the pressing disc leveling off under the pressure of the same, which also helps to expel any air bubbles already present in the product.
The machine stops automatically closing the product cut-off ball valve when the desired filling level of the drum is reached. The level can be adjusted at will.
On request, it is possible can have a filling kit also for 20-25 liter pails/buckets.
This model is characterized by being equipped with a cart on wheels for easier handling, thus being able to be connected to different presses for feeding the product according to need or be stowed away if unused.
- Strong welded frame with central column bolted on a supporting base plate on wheels, provided with a drum centering disc.
- Machine equipped with two tubular profiles under the base plate for handling also by means of forklift or pallet jack.
- Support cart for the head and filling pipe, with vertical sliding on linear bearings.
- Drum centering device under the filling disk.
- Standard 3″ DN80 product passage hose, fixed to the filling disk or to the ball valve with quick couplings, for quick disassembly and cleaning.
- Standard 3″ DN80 ball valve (not always necessary with products with a higher viscosity) fixed with quick couplings between the product pipe and the filling disk, with pneumatic actuator for the opening controlled manually from the control panel and for automatically closing when the drum is totally filled.
- Filling disc with rounded edges to avoid damaging the possible nylon or aluminum bag inside the drum.
- On request, microperforated filling disk for the air suction system in order to keep in place a plastic sheet to be put on the product at the end of filling.
- Vertical pneumatic cylinder for moving on linear bearings the cart with the filling head, fitted with a safety valve to prevent its unintended descent.
- The pressure of the product filling unit is adjustable, in order to work with products of different viscosity.
- It is possible to set an aiding upward back pressure of the filling unit, so as to adjust the weight on the product according to its viscosity, preventing it from going over the filling disk.
- If connected to one of our presses/extruders, it’s integrated our communication system that starts and stops the press when the drum is empty or full.
- Control Panel for starting-stopping, opening-closing the ball valve and to adjust the pressure of the filling unit on the product.
- On request, load cell scale to display the weight of the container.
- On request, standard 3″ DN80 hose fitted with quick couplings for the connection of the machine to the extruder/press feeding the product.
- Totally pneumatic supply, no electrical connection required.
Nannini Renato Custom.
Thanks to our entirely in-house Design and Production Departments, we are able to meet any customization request,
taking into full account the timing needs of your business.
Request more information.
Get in touch with us.
